|
Product Details:
|
| Product Name: | Grtp Strut Grating | Material: | Galvanized Steel Or Aluminum |
|---|---|---|---|
| Width: | 5", 7", 10", 12" | Hole Shape: | Round |
| Depth: | 1-1 /2", 2", | Application: | Walkways , Stairs |
| Highlight: | aluminum safety grating,safety grating walkway |
||
>>> Introduction of the Round Hole Metal Grtp Strut Grating
Round Hole Metal Grtp Strut Grating specification
| plank material | width | depth | span |
| steel 11GA | 24" | 5‘’ | 2feet, 3feet,4feet,5feet, 6feet,7feet,8feet,9feet.10feet,11feet,12feet |
| steel 11GA | 30" | 5" | |
| Aluminum 0.125" | 24" | 5" |
 |
Hole distribution map and reference data of Round Hole Metal Grtp Strut Grating Panel |
>>> Application Of Round Hole Metal Grtp Strut Grating
Because the grating has high anti-slip and resists rust and corrosion features, it is widely used at the rooftop of the train,
industry flooring, platform of the traffic and offshore drilling, etc.
Advantages of the Round Hole Metal Grtp Strut Grating
1.The circular openings (38% of surface area depending on product size) are small enough to catch most falling tools and
other dangerous objects and the self-cleaning open design permits quick drainage.
2.Sturdy construction provides the advantages of heavy load-carrying capacity with minimal deflection; rugged durability with
longer-lasting performance.
3.Light, easy-to-handle planks make installation simple and quick. Most sections are rapidly bolted, clamped or welded into
place.
4.Economical - In addition to low material cost and nominal erection cost, Perf-O Grip™ Grating also features long-lasting
rust-resistant materials and finishes.
5.A variety of standard widths and channel heights are available as well as numerous non-standard shapes and sizes to meet
almost any requirement.
installation of the Round Hole Metal Grtp Strut Grating
Bolt Seats securely anchor the grating to structural supports. The standard bolt seat features oblong holes specifically
designed to ensure a vertical anchor (with a 3/8" bolt) even if the hole is off concentrically by as much as 1/4". Available
in mill-galvanized steel, aluminum and stainless steel.
J-Clips fasten the grating securely to the supporting steel without drilling holes. Standard finish is galvanized.
Mid support clips can be used at midspan to increase load carrying capacities of individual channels by fastening several
planks together to form an integral section. The Midsupport Clip is manufactured from galvanized steel and includes two bolts.
Contact Person: David
Tel: 86-18732199987
Fax: 86-1336-3891298
