|
Product Details:
|
| Product Name: | Self Adhesive Insulation Pins | Material: | MS, SS, ALU |
|---|---|---|---|
| Length: | 15-280mm | Pin Diameter: | 10ga, 12ga, 14ga, 3mm |
| Small Order: | Available | Customization: | Acceptable |
| High Light: | insulation hangers,insulation pins and washers |
||
1.material: mild steel , stainless steel, aluminum
2. surface treatment: zinc coating, copper plated and polished
3. standard: JG149-2003
4. small order are available
5. customization are acceptable
|
square base size |
pin diameter |
pin length |
|
50mmx50mm |
10ga, 3mm, 12ga, 14ga |
1/2" |
|
50mmx50mm |
10ga, 3mm, 12ga, 14ga |
1" |
|
50mmx50mm |
10ga, 3mm, 12ga, 14ga |
1-1/2" |
|
50mmx50mm |
10ga, 3mm, 12ga, 14ga |
1-3/8" |
|
50mmx50mm |
10ga, 3mm, 12ga, 14ga |
2" |
|
50mmx50mm |
10ga, 3mm, 12ga, 14ga |
2-1/2" |
|
50mmx50mm |
10ga, 3mm, 12ga, 14ga |
3" |
|
50mmx50mm |
10ga, 3mm, 12ga, 14ga |
4" |
|
50mmx50mm |
10ga, 3mm, 12ga, 14ga |
5"-12" |
| Steel NO. | C≤ | Mn≤ | Si≤ | S≤ | P≤ | Cr≤ | Ni | Mo | Cu≤ | N |
|
S32750(SAF2507)
00Cr25Ni7Mo4N
|
0.03 | 1.20 | 0.8 | 0.020 | 0.035 | 24.0/26.0 | 6.0/8.0 | 3.0/5.0 | 0.50 | 0.24/0.32 |
|
S31803(SAF2205)
00Cr22Ni5Mo3N
|
0.03 | 2.00 | 1.0 | 0.020 | 0.030 | 21.0/23.0 | 4.50/6.50 | 2.50/3.50 | 0.08/0.20 | |
|
S31500(3RE60)
00Cr18Ni5Mo3Siz
|
0.03 | 1.2/2.00 | 1.4/2.00 | 0.030 | 0.030 | 18.0/19.0 | 4.25/5.25 | 2.50/3.00 | 0.05/0.10 |
1.bases are tight with pins
2.Pins are soft, easy bend over
3.double faced adhesive has good stickiness
4.the pin length must more than 10-20mm than insulation materials
1. Environmentally-friendly, our product meet American standard, Japanese standard, European standard and German standard.
2. Light, dust free, fire retardant (A) and easy to install
3. Heat reflection, heat insulation, sound insulation, counter radiation, counter vibration.
4. During Summer: moisture barrier, sun protection, waterproof, energy saving consumed by cool air conditioning
5. During Winter: heat protection, remarkable energy saving consumed by warm air conditioning
6.Best results are obtained when ambient temperature is above 40° F at the time of application
7.A firm straight, forward pressure should be used. Do not twist
Contact Person: David
Tel: 86-18732199987
Fax: 86-311-85523962
