Product Details:
|
Name: | Wet Room Tile Backer Board Fixing Washers | Application: | Secure Insulation Boards To Walls Or Ceilings Or Floors |
---|---|---|---|
Material: | Stainless Steel Or Galvanized Steel | Size: | 36mm |
Small Order: | Support | Thickness: | 0.6mm |
Samples: | Support | Center Hole: | 5mm |
Package Customization: | Support | Logo: | Could Be Customized And Stamped On The Washer |
High Light: | Wet Room Tile Backer Board Washers,100 Pack Tile Backer Board Washers,Stainless Steel Tile Backer Board Washers |
The tile backer board fixing washers are widely used to fix insulation boards, tile backer boards,
foam slate, gypsum boards, composite boards extruded plates, you can also directly use
the washers for fix the building board to the frame.
material | thickness | diameter | center hole |
galvanized steel |
0.6mm |
36mm |
5mm |
stainless steel | 0.6mm | 36mm | 5mm |
1: The tile backer board fixing washers are made of high-quality galvanized steel or stainless steel material, it's firm and durable, not easily deformed, and are protected from corrosion and anti-wear.
3: The tile backer board fixing washers have a counter sunk mid-section to allow the screw head to pull into the board but the outer rim of the washer to remain flush with the board surface. This is to maintain the flat board surface ready for easy unhindered application of the subsequent layers. |
1. When using these easy fix washers to fix tile backer boards to walls, ceilings, or floors, it is recommended to use 15 washers per 1200 x 600mm board. 2. This is only a guide and specifically it's depended on the type, thickness, sub surface and what is to be put onto the board. 3. It is the installers responsibility to use the correct number of washers to hold the tile backer board in place. |
|
1. 50 pcs/bag, 100 pcs/bag, 200 pcs/bag or as your requirement 2. paper carton 3. wood pallet 4. special package requirement is supported and could be customized 5. special logo could be customized and stamped on the washers |
1. Are you a manufacture or a trader?
We are a manufacture, located in Hebei province, China.
2. Do you support product customization?
Yes, the material and the size, all could be customized.
3. Do you support package customization?
Yes, the package could be customized according to your need.
4. Can you stamp the logo on the washers?
Yes, the laser logos could be customized and stamped on the washers.
5. Can i get samples?
Yes, we have free samples for you to check the quality.
6. Can you promise the quality?
Yes, our quality is high standard.
Contact Person: cherry
Tel: 86-18031853647
Fax: 86-311-85523962