|
Product Details:
|
| Product Name: | Cup Head Insulation Pin | Material: | Stainless Steel Or Carbon Steel |
|---|---|---|---|
| Head Diameter: | 30mm Or 38mm | Finished: | Galvanized , Copper Coated ,polished |
| Pin Diameter: | 2.7mm | ||
| High Light: | 38mm Stud Welding Pins,30mm Stud Welding Pins,Duct Liner Stud Welding Pins |
||
1. Certification: ISO9001
2.Material: Low Carbon Steel, material specifications or certification available.
3.Finish: Mild Steel pins are galvanized/coated, washer is galvanized.
4.Annealing: All steel pins are fully annealed unless otherwise specified.
5.Paper Insulating Washers:Available for welding through foil faced insulation.Paper insulating washers can be
ordered separately or factory installed.
6.Compatibity: All pins are compatible and recommended for use with all brands of CD stud welding equipment
|
common size of duct liner Cupped Head Weld Pin |
||
| Cupped Head Weld Pin diameter |
base size |
length |
| 2.7mm | 25mm, 30mm |
15-250mm |
| 3mm | 25mm, 30mm |
15-250mm |
| 3.4mm | 25mm, 30mm |
15-250mm |
Duct Liner Cupped Head Weld insulation Pin
Metal Cupped Head Pins type of Capacitor Discharge (CD) pin is welded through the insulation, allowing
the fabrication to be done in one easy step. The head of the pin is attached to the nail, so there is no need to
add a washer.
Metal Cupped Head Pins Reduced labor time - Neat, finished appearance
Apply of Duct Liner Cupped Head Weld insulation Pin
Cupped Head Insulation Pins simplify the permanent installation of "Duct Liner" or other insulation materials
to duct work or to other heating, ventilating or air conditioning sheet metal configurations and housings.
A fabricated part made up of a weld pin and a staked on retaining washer. Variations of material are available.
This product is usually applied with a capacitor discharge stud welder. Used for securing insulation. Also used
as a hook-less lacing anchor to secure insulation inside fabricated blankets.
| Duct Liner Cupped Head Weld insulation Pin For Auto Welding Resistance Equipment | |
| BETTER PLATING | weldpin shanks Zinc and Chromate plated exceeding SMACNA standards and providing a professional appearance.Quilting Cup Head Insulation Pins are copper plated. |
| REDUCED DOWN TIME | Consistent point quality reduces frequency of machine adjustments. |
| STRONGER WELDS | Hardened steel point assures positive electrical contact for complete sheet to pin fusion. |
| CORROSION RESISTANCE | Plating exceeds current SMACNA standards for corrosion resistance. |
| TEMPERATURE RANGE | Quilting Cup Head Insulation Pins function properly over normally accepted operating range of temperatures of 0 degrees C to 121degrees C and are not adversely affected at temperatures of 0 degrees C to 287 degrees C. |
| VIBRATIONS | Quilting Cup Head Insulation Pins will not fatigue or be physically affected by vibrations normally found in high velocity air handling systems. |
our service
package service: Carton, Fumigation-Free Wooden Box, Fumigation-Free Tray, Warning Tape, Color Label,
Custom Logo
delivery service:by sea, by air and door to door service
stock service: we have common size of Insulation Fastener Cup Head Pins with Mechanized packing product
in stock.
sample services: supply free sample for Insulation Fastener Cup Head Pins. special size of Mechanized packing ,
need customer paid the mould cost.
quality service: iso 9001-2008, material test cerfication, factort test report and third party test report from SGS and
BV.
We are willing to rush orders and offer you competitive prices for our products and services. You won't regret
choosing us as your supplier for Insulation Fastener Cup Head Pins, studs, and any other supplies you need
Contact Person: emily
Tel: 86-18032788121
Fax: 86-311-85523962
