Ducting Accessories Insulation anchor pins With Washer Fit Fixing Rock Wool

Ducting Accessories Insulation anchor pins and Hardware installers insulation material

 
Introduction of insulation anchors pins
 
Huihao is a insulation fasteners/insulation anchors manufacturing company, we produce all kinds of insulation pins and washers. Our products

includes CD weld pins, Cup head weld pins, perforated base pins, self adhesive pins, Lacing Anchors, Quilting pins, all kinds of self locking

washers, Dome caps

 
1. Detail of the perforated base insulation anchor pins and seld adhesive insulation fixing pins

photos of insulation anchor pins	specification of insulation anchor pins
	material pin dia base size length Gal steel ,ss , alu 12ga ( 0.106 " ) 2''X2'' 1/2" Gal steel ,ss , alu 12ga ( 0.106 " ) 2''X2'' 1" Gal steel ,ss , alu 12ga ( 0.106 " ) 2''X2'' 1-5/8" Gal steel ,ss , alu 12ga ( 0.106 " ) 2''X2'' 2" Gal steel ,ss , alu 12ga ( 0.106 " ) 2''X2'' 3-1/2" Gal steel ,ss , alu 12ga ( 0.106 " ) 2''X2'' 4 1/2" Gal steel ,ss , alu 12ga ( 0.106 " ) 2''X2'' 5 1/2" Gal steel ,ss , alu 12ga ( 0.106 " ) 2''X2'' 6" Gal steel ,ss , alu 12ga ( 0.106 " ) 2''X2'' 8"
	D C L 14 ga (.080) 7/8" 2-1/2" 14 ga (.080) 7/8" 4-1/2" 12 ga (.106) 7/8" 2-1/2" 12 ga (.106) 7/8" 4-1/2"
	stick pin diameter base plate size insulatiion pin length 10ga,12ga ,14ga 2 square w / tape 1 10ga,12ga ,14ga 2 square w / tape 1 - 5 / 8 " 10ga,12ga ,14ga 2 square w / tape 2   10ga,12ga ,14ga 2 square w / tape 2 - 1 / 2" 10ga,12ga ,14ga 2 square w / tape 3 - 1 / 2   10ga,12ga ,14ga 2 square w / tape 4 - 1 / 2" 10ga,12ga ,14ga 2 square w / tape 5 - 1 / 2 10ga,12ga ,14ga 2 square w / tape 6 - 1 / 2" 10ga,12ga ,14ga 2 square w / tape 8 "
	application: Stainless Steel 1" Cup Head Econo Point Weld Pins Use With All FG, RH, PBF, MF, CDMF Pinspotters. terms Econo Point Weld Pins diameter cupped washer size Econo Point Weld Pins Length HH-12 2.7mm 1-1/2 Stnd up to 6 HH-10 3.4mm 1-1/2 Special Order   ZG-14 2.0mm 1-3/16 Up to 2-1/2 ZG-12 2.7mm 1-3/16 Stnd up to 6

2.Common size and usages of Ducting Accessories Insulation anchor pins and Hardware :
 
1 - 5/8": Used for 1-1/2" .75# Fiberglass Duct Wrap
2 - 1/2": Used for 2" Fiberglass Rigid Board / Foam Board
4 - 1/2": Used for 4" Fiberglass Rigid Board / R-13
6 - 1/2": Used for R-19 Fiberglass Batt Insulation
9 - 1/2": Used for R-30 Fiberglass Batt Insulation
12 - 1/2": Used for R-38 Fiberglass Batt Insulation
 
3.Advantages of the Ducting Accessories Insulation anchor Pins and Hardware

· Suitable for all kinds of wall
· High pull-off strength for a higher security of the system
· Low thermal conduction addition value to avoid thermal bridge
· Galvanized layer on the steel nail to protect the nail from alkali