Galvanized Steel Tile Backer Board Washers 36mm For Wooden Floors And Stud Walls

36mm Tile Backer Board Washers are used to secure tile backer boards, cement board, XPS insulation boards, and other insulation foam to wooden floors or stud walls.

• 36mm Tile Backer Board Washers are countersunk, allowing the screw head to pull into the board with the outer rim of the washers remaining flush with the board surface.
• Suitable for tile backer boards, wooden floors, and stud walls, as the washers help maintain the flat board surface ready for the secure application of subsequent layers such as tile adhesives and plaster.
• Feature a perforated surface, which provides maximum board surface exposure for better adhesion of standard adhesives and plasters, minimizing the risk of surface delamination or damage.
• Made from stainless steel 304 or galvanized steel to protect against corrosion and minimize degradation over time.
• Easy to fix & secure for efficient installation.

When using the 36mm tile backer board washers to fix tile backer boards to walls and floors, it is recommended to use 15 washers per 1200 x 600mm board.

Note: This is only a guide. The exact number depends on the board type, thickness, subsurface, and intended application. The installer must determine the correct number of washers needed to securely hold the tile backer board in place.

• 50 pcs/bag, 100 pcs/bag, 200 pcs/bag or as per your requirement
• Paper carton packaging
• Wood pallet available