|
Product Details:
|
| Product Name: | Insulation Hangers | Material: | Galvanized Steel , Stainless Steel , Aluminum |
|---|---|---|---|
| Pin Dia: | 12 Ga As Standard | Base Size: | 2' X'2'' As Standard |
| Size: | 2.7MM X 63.5MM | Washer Shape: | Round Or Square |
| Highlight: | insulation pins and washers,insulation wall plugs |
||
Material:Low carbon steel, Aluminum or stainless steel.
Plating pin: galvanized coating or copper plated
Plating base: galvanized coating,
Self-locking washer: Available in all kinds of sizes, shapes and materials
Base size 2"×2" /50mm square base
Pin size :12GA( 2.7mm) -3mm
Pins length:1" 1-5/8" 1-1/2" 3-1/2" 4-1/2" 5-1/2" 6-1/2" etc
Accept customization for other lengths
| Pin diameter | Base size | Pin length in common | Washer |
| 2.7mm or 0.106'' | 2''x2''base (50mmx50mm) | 1'' (25mm) | Available |
| 2.7mm or 0.106'' | 2''x2''base (50mmx50mm) | 1 1 / 2''(38mm) | Available |
| 2.7mm or 0.106'' | 2''x2''base (50mmx50mm) | 1 5 / 8'' (48mm) | Available |
| 2.7mm or 0.106'' | 2''x2''base (50mmx50mm) | 3 1 / 2 ‘’(89mm) | Available |
| 2.7mm or 0.106'' | 2''x2''base (50mmx50mm) | 4 1 / 2 ‘’(114mm) | Available |
| 2.7mm or 0.106'' | 2''x2''base (50mmx50mm) | 5 1 / 2 ‘’(140mm) | Available |
1, Clean the surface: Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter.
2,Peel off backing:Remove the protective release paper taking care not to touch the adhesive.
3, stick pin in place: Place the hanger in the required position and press the base against the surface to be insulated
4 ,pressure the pin and wait 15-20 minutes,
5.Install insulation and secure with self locking washer
insulation hangers Application: It is fixed on the position where there is significant wind-suction-force or if the height is more than 20m or if the finishing coat is tile etc
Contact Person: David
Tel: 86-18732199987
Fax: 86-1336-3891298
