|
Product Details:
|
| Product Name: | Self Adhesive Insulation Hangers | Material: | Aluminum, Mild Steel, Galvanized Steel |
|---|---|---|---|
| Pin Diameter: | 12 Ga | Length: | 25mm-180mm |
| Base Thickness: | 0.4-0.8mm | Base Size: | 2" X 2" |
| High Light: | insulation hangers,insulation pins and washers |
||
|
Self-Adhering Hangers are designed to attach insulation to clean, dry, smooth, non-porous surfaces.
Designed Self Adhesive Insulation Hangers / Annular Groove Insulation Anchors Specifications:
Material:
Other details:
A complete line of Self-Locking Washers in various styles and materials is available for use with Self-Adhering Insul-Hangers. |
Self adhesive hanger or self - adhesive insulation anchor, is a fabricated 2" X 2" metal base with Self Stick adhering double-sided tape
on the reverse, or installation side of the anchor base. An insulation pin is pre-attached for impaling and installing various thermal and
acoustical insulation materials. Popular materials are Mild Steel, Aluminum and Stainless Steel, with combinations of these materials
also occurring for special applications. Typical insulation pin diameter is 12 gauge (0.105" diameter.), while other diameters are available.
This insulation anchor and is used in conjunction with Self Locking Insulation Washers,or Speed Clips.
·Suitable for all kinds of wall
·High pull-off strength for a higher security of the system
·Low thermal conduction addition value to avoid thermal bridge
·Galvanized layer on the steel nail to protect the nail from alkali
Application: It is fixed on the position where there is significant wind-suction-force or if the height is more than 20m or if the finishing coat is tile etc
WIPE SURFACE CLEAN.Anchor should be applied to a clean, dry non-porous surface
PEEL OFF RELEASE BACKING.NOTE: Double faced foam tape has a one-year active shelf life
STICK ANCHOR IN PLACE.Select location before contact with surface.Press firmly
APPLY FIRM PRESSURE.20 pounds of pressure should be applied all around the base of the anchor
ALLOW TO STAND 15-20 MINUTES.This will permit better adhesion to take place
INSTALL INSULATION AND SECURE WITH WASHER.Recommended load is 3 lbs. per anchor(.75 lbs./sq. inch maximum)
self adhesive hanger and SELF-STICK ANCHORS from huihao company
500 or 1000 units per carton or plastic bag
Contact Person: emily
Tel: 86-18032788121
Fax: 86-311-85523962
