Galvaninzed Steel Tab Washers For Foam Tile Backer Board 1-1/4"

Galvanized Steel Tab Washers can be used in all tile backer board applications for maximum holding strength. Take advantage of increased allowable spacing when used in combination with insulation board fasteners, or fortify your installation for heavier or larger format tile.

• Item: Galvanized Steel Tab Washers For Foam Tile Backer Board 1-1/4"
• Material: Galvanized steel (stainless steel 304 material also available)
• Size: 1-1/4" / 32mm
• Center Hole: 5mm
• Thickness: 0.4-0.7mm

Galvanized Steel Tab Washers are hardened steel washers that provide maximum holding strength when fastening tile backer board to stud framing. Each washer has tabs for pre-positioning prior to driving the fasteners. These reverse tabs also prevent the washers from stacking while packaged - making them easy to separate. When using the steel tab washers in your installation, the fastener spacing increases to 12 inches.

1. Maximum Holding Strength: 1 1/4-in diameter steel washer for maximum holding strength and durability.
2. Fast Installation: Designed for use with 1/4-in, 1/2-in and 5/8-in tile backer, up to 12-in spacing.
3. Versatility: Recessed to accommodate self-drilling fasteners for wood or metal stud framing.
4. Corrosion Resistant: Hardened galvanized steel.