50x50mm Base Plate Odm Self Sticking Insulation Hangers Thermal For Exterior Wall

50x50mm base plate thermal insulation Self-sticking insulation hangers for exterior wall

Quick detail of thermal insulation Self-sticking insulation hangers :

rock wool metal stick pins are easily install any type of insulation up to 3.5" thick to air ducts, metal buildings, concrete foundations - even to the underside of wooden roofs. Insulation Hangers are perfect for installing fiberglass or rubber insulation blankets or polystyrene board. Insulation Hangers have a sticker backing to make placing easier. They also have a unique Easy-Peel adhesive backing design so that there isn't any

fumbling with the release paper.

thermal insulation Self-sticking insulation hangers specification:

Pic of thermal insulation Self-sticking insulation hangers specification :

Recommended assembly method of thermal insulation Self-sticking insulation hangers :

1.speration Temperatures: 15 to 25 ℃
2.Working Surface should be clean and dry, free of dust, grease, oil and any other loose matter.
3.Insulation can be impaled immediately and firmly locked with fastening washer.
4.The Maximum strength of adhesive is achieved after 24 hours

Insulation Fixing Pins is with high penetration strength with all types of thermal insulation boards, suitable for brick and conrete walls.

Fixing parts for thermal insulation Self-sticking insulation hangers:

· ROUND TYPE SELF LOCKING WASHERS
· SQUARE TYPE SELF LOCKING WASHERS
· METAL DOME CAP WASHERS
· SPEED CLIPS WITH PLASTIC COVER

Packing of the thermal insulation Self-sticking insulation hangers specification :