|Place of Origin:||China|
|Model Number:||Self Adhesive Insulation Pins|
|Minimum Order Quantity:||Negotiable|
|Packaging Details:||500 pcs per carton ,48 cartons on one pallet|
|Delivery Time:||12 days after the first payment|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram|
|Supply Ability:||100,000 pcs per week|
|Product Name:||Self Adhesive Insulation Pins||Material:||Galvanized Steel , Stainless Steel , Aluminum|
|Pin Dia:||0.106'' As Standard||Base Size:||50mmx50mm As Standard|
|Pin Length:||25mm - 200mm ,could Be Customized||Sticker Color:||White , Red,blue In Common|
Self Adhesive Insulation Pins are installed with the double face tape, the insulation is impaled over the spindle & secured with
a self-locking washer.
Self Adhesive Insulation Pins are designed to fix efficiently insulation on smooth surfaces such as air ducts, attenuators, chambers
and enclosures. It consists of a pin, firmly mounted on a high quality self adhesive base.
Detail Specification Of Self Adhesive Insulation Pins:
Material:Galvanized steel in common, also could be stainless steel and aluminum
Tape color: red, white, blue, etc
|Pin diameter||Base size||Pin length in common||Clips Size|
|12 Ga (2.7mm or 0.106'')||50mmx50mm||1''||22mm - 40mm, 35mm in common|
|12 Ga (2.7mm or 0.106'')||50mmx50mm||2''||22mm - 40mm, 35mm in common|
|12 Ga (2.7mm or 0.106'')||50mmx50mm||2 1 / 2''||22mm - 40mm, 35mm in common|
|12 Ga (2.7mm or 0.106'')||50mmx50mm||3 1 / 2''||22mm - 40mm, 35mm in common|
|12 Ga (2.7mm or 0.106'')||50mmx50mm||4''||22mm - 40mm, 35mm in common|
12 Ga (2.7mm or 0.106'')
|50mmx50mm||5 1 / 2''||22mm - 40mm, 35mm in common|
|12 Ga (2.7mm or 0.106'')||50mmx50mm||8''||22mm - 40mm, 35mm in common|
|The Self Stick Adhesive Insulation Anchors also could be produced as request via from material, pin dia and length.|
Advantages of the Self Adhesive Insulation Pins
2. Light, dust free, fire retardant and easy to install
3. Heat reflection, heat insulation, sound insulation, counter radiation, counter vibration and shielding
4. During Summer: moisture barrier, sun protection, waterproof, energy saving consumed by cool air conditioning
5. During Winter: heat protection, remarkable energy saving consumed by warm air conditioning
The pins could have washers together
Self Adhesive Insulation Pins USE:
These hangers are designed to mechanically hold insulation material to various surfaces. It is very important for the user to determine
the suitability of this product for each application. Discretion must be used in application, and we recommend that the user first perform
a test application to satisfy himself of the desirability of using the product for the user’s particular purpose.
Self Adhesive Insulation Pins CAUTION:
The user is responsible for determining the suitability of the application. Hangers must be applied to a clean, dry, non-porous surface that
is free of all oil, films, dust, rust, etc. Self-adhering hangers are not recommended for concrete or painted surfaces. It is important that they
not be used where operating temperatures can exceed 150° F at the point of adhesion. Hangers should not be used on ceilings or roofs of
metal buildings or any surface the reverse side of which may be exposed to heat concentration from sunlight, etc., direct or otherwise. Load
per anchor should not exceed 3 lbs.
Self Adhesive Insulation Pins APPLICATION:
Best results are obtained when ambient temperature is above 40° F at the time of application. Remove the release paper from the base plate
and apply hanger to a suitable flat surface. A firm straight, forward pressure should be used. Do not twist. Due to the quick-tack nature of the
adhesive, it is very important that the release paper not be removed until ready to apply the hanger. Insulation may be applied immediately after
properly securing the hanger. Hangers should be stored at 75° F and 50% relative humidity. It is important that stock be rotated. Shelf life is
estimated at 2 years if stored as recommended.
WIPE SURFACE CLEAN.Anchor should be applied to a clean, dry non-porous surface
PEEL OFF RELEASE BACKING.NOTE: Double faced foam tape has a one-year active shelf life
STICK ANCHOR IN PLACE.Select location before contact with surface.Press firmly
APPLY FIRM PRESSURE.20 pounds of pressure should be applied all around the base of the anchor
ALLOW TO STAND 15-20 MINUTES.This will permit better adhesion to take place
Packaging methods of the Self Adhesive Insulation Pins
The default packaging way is bulk packing or small boxes packing in cartons then on Pallets.
We can assist you in determining the most effective packaging style, material, and size for your unique products or as your requirement.
Contact Person: cherry