Huihao Hardware Mesh Product Limited- Admin@huihaomesh.com

pattern design, frame design, color finished and installation parts

Insulation pins- Fabric Lamianted glass- Mesh Drapery - Architectural Wire Mesh - Aluminum Expanded mesh - Ultra fine wire 

Home ProductsSelf Adhesive Insulation Pins

Galvanized Self Adhesive Insulation Pins With Round Base Use for Air Conditioner

Galvanized Self Adhesive Insulation Pins With Round Base Use for Air Conditioner

  • Galvanized Self Adhesive Insulation Pins With Round Base Use for Air Conditioner
  • Galvanized Self Adhesive Insulation Pins With Round Base Use for Air Conditioner
  • Galvanized Self Adhesive Insulation Pins With Round Base Use for Air Conditioner
  • Galvanized Self Adhesive Insulation Pins With Round Base Use for Air Conditioner
Galvanized Self Adhesive Insulation Pins With Round Base Use for Air Conditioner
Product Details:
Place of Origin: China
Brand Name: Huihao
Certification: ISO
Model Number: Self Adhesive Insulation Pins
Payment & Shipping Terms:
Minimum Order Quantity: Negotiable
Packaging Details: length15mm-25mm, 2000pcs per carton, 48cartons per pallet. length 30mm-80mm, 500pcs per carton, 48 cartons per pallet. length 90mm-120mm, 25pcs per carton, 48 cartons per pallet
Delivery Time: 7 work days
Payment Terms: L/C, T/T, Western Union,paypal
Supply Ability: 300000pcs per 20 days
Contact Now
Detailed Product Description
Product Name: Self Adhesive Insulation Pins Material: Mild Steel
Round Base: 35mm Pin Length: 25mm-180mm
Round Base Thickness: 0.4-0.8mm Application: Use For Air Conditioner
High Light:

insulation pins and washers

,

insulation wall plugs

 

Galvanized Self Adhesive Insulation Pins With Round Base Use for Air Conditioner

 

Pin plating: galvanized costing is standard. yellow white and blue gal are available
Washers: self-locking washers are available in a variety of sizes, shapes and materials
 
Usage: Exclusively used for fixing adiabatic materials in ducts of air-conditioner, for glass-wool and rock-wool in soundproofing
              works, and for the duct-lining

 

PIN DIAMETER

ROUND BASE

Length

0.106"

1-1/2"

Stnd up to 6"

0.135"

1-1/2"

to be order

0.080"

1-3/16"

Up to 2-1/2

0.106"

1-3/16"

Stnd up to 6"

 
self Adhesive Insulation Pins​ advantages
·Suitable for all kinds of wall
·High pull-off strength for a higher security of the system
·Low thermal conduction addition value to avoid thermal bridge
·Galvanized layer on the steel nail to protect the nail from alkali

 

GUIDELINES FOR self Adhesive Insulation Pins
 
USE: These hangers are designed to mechanically hold insulation material to various surfaces. It is very important
for the user to determine the suitability of this product for each application. Discretion must be used in application,
and we recommend that the user first perform a test application to satisfy himself of the desirability of using the
product for the user’s particular purpose.
 
self Adhesive Insulation Pins​ CAUTION:
 
The user is responsible for determining the suitability of the application. Hangers must be applied to a clean, dry, non-porous surface
that is free of all oil, films, dust, rust, etc. Self-adhering hangers are not recommended for concrete or painted surfaces. It is important
that they not be used where operating temperatures can exceed 150° F at the point of adhesion. Hangers should not be used on ceilings
or roofs of metal buildings or any surface the reverse side of which may be exposed to heat concentration from sunlight, etc., direct or
otherwise. Load per anchor should not exceed 3 lbs.
 
self Adhesive Insulation Pins​ APPLICATION:
 
Best results are obtained when ambient temperature is above 40° F at the time of application. Remove the release paper from the base
plate and apply hanger to a suitable flat surface. A firm straight, forward pressure should be used. Do not twist. Due to the quick-tack nature
of the adhesive, it is very important that the release paper not be removed until ready to apply the hanger. Insulation may be applied immediately
after properly securing the hanger. Hangers should be stored at 75° F and 50% relative humidity. It is important that stock be rotated. Shelf life
is estimated at 2 years if stored as recommended.
 
Designed Self Adhesive Insulation Hangers / Annular Groove Insulation Hangers
 
WIPE SURFACE CLEAN.Anchor should be applied to a clean, dry non-porous surface
PEEL OFF RELEASE BACKING.NOTE: Double faced foam tape has a one-year active shelf life
STICK ANCHOR IN PLACE.Select location before contact with surface.Press firmly
 
Designed Self Adhesive Insulation Hangers / Annular Groove Insulation Hangers
 
APPLY FIRM PRESSURE.20 pounds of pressure should be applied all around the base of the anchor
ALLOW TO STAND 15-20 MINUTES.This will permit better adhesion to take place
 
 
 

Contact Details
Huihao Hardware Mesh Product Limited

Contact Person: emily

Tel: 86-18032788121

Send your inquiry directly to us
Other Products